TL V6-3206cc 3.2L SOHC MFI (1998)
Extension Housing: All Technical Service Bulletins
Repair Procedure
REPAIR PROCEDURE
1.
Make sure the vehicle is in Park, then raise the vehicle on a hoist.
2.
Use brake cleaner and compressed air to clean the area around the 36 mm sealing bolt. Wear eye protection.
3.
Remove the 36 mm sealing bolt.
4.
Use brake cleaner and compressed air to clean the threads in the transmission housing. Wear eye protection.
5.
Install the 0-ring on the new sealing bolt.
6.
Install the new 36 mm sealing bolt. Do not use any thread lock or thread sealer. Torque the bolt to 78 N-m (58 lb-ft).
7.
Lower the vehicle.
8.
Center-punch a completion mark above the fifth character (A) of the engine compartment VIN.
