TL V6-3206cc 3.2L SOHC MFI (1998)
Fluid Pump: Testing and Inspection
Assembly
1. Install the ATF pump gears and ATF pump driven gear shaft the ATF pump body.
NOTE:
-
Lubricate all parts with ATF during inspecting.
-
Install the ATF pump driven gear with its grooved and chamfered side facing up as shown.
2. Measure the side clearance of the ATF pump drive and driven gears.
-
ATF Pump Gears Side (Radial) Clearance Standard (New):
ATF Pump Drive Gear: 0.210 - 0.265 mm (0.0083 - 0.0104 inch).
ATF Pump Driven Gear: 0.070 - 0.125 mm (0.0028 - 0.0049 inch).
