TL V6-3206cc 3.2L SOHC MFI (1998)
5. Remove the bolt securing the shift cable guide bracket, then remove the transmission beam.
6. Place a jack under the transmission, and raise the transmission just enough to take the weight off of the mounts, then remove the stop holder, the
mid mount stops and the mid mounts.
7. Lower the transmission with a jack.
8. Remove the 6 mm bolt from the transmission housing, and remove the mainshaft and countershaft speed sensors.
9. Replace the O-rings with new ones before reassembling the mainshaft and countershaft speed sensors.
10. Install the washers on the mainshaft and countershaft speed sensors, then install them on the transmission housing.
