TL V6-3206cc 3.2L SOHC MFI (1998)
Transmission Position Switch/Sensor: Service and Repair
REMOVAL
1. Shift the detent lever to the P position.
2. Pry the lock tabs on the lock washer, then remove the locknut and lock washer.
3. Remove the bolts securing the A/T gear position switch, then remove the A/T gear position switch.
INSTALLATION
1. Set the A/T gear position switch to the N position as shown.
NOTE: The A/T gear position switch clicks in the N position.
2. Shift the detent lever to the N position.