TL V6-3206cc 3.2L SOHC MFI (1998)
11. Raise the transmission with a jack, then install the mid mounts. Tighten the mid mount bracket bolts, then tighten the mid mount nuts.
12. Install the transmission beam on the rear transmission mount bracket/mount, then tighten the three bolts loosely.
13. Tighten the three transmission beam bolts, then tighten the two transmission beam bolts to the specified torque.
14. Install the shift cable guide bracket on the transmission beam.
15. Install the heat shields.
16. Install the exhaust pipe A and the three way catalytic converter, then install the exhaust pipe A cover.
17. Push the H02S (sensor 2) connector into the vehicle, then secure with the harness grommet.
18. Install the H02S (sensor 2) harness cover.
19. Connect the H02S (sensor 2) connector.
