TL AWD V6-3.7L (2010)
Cowl Moulding / Trim: Service and Repair
Cowl Cover Replacement
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to damage the body.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove these items:
-
Windshield wiper arms See: Wiper and Washer Systems/Wiper Motor/Service and Repair
-
Engine compartment cover See: Access Cover/Service and Repair
2. Remove the cowl cover (A).
1. Detach the clips (B).
2. Detach the clips (C, D, E) by carefully pulling up the cover.
3. Release the hood hinge covers (F) from both hood hinges (G).
3. If necessary, release the hooks (A), then remove the A/C intake umbrella (B).
