TL AWD V6-3.7L (2010)
Front Door Exterior Handle: Service and Repair
Front Door Outer Handle Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the door.
1. Remove these items:
-
Door panel See: Front Door Panel/Service and Repair/Front Door Panel Removal/Installation
-
Door end trim See: Front Door Panel/Service and Repair/Front Door Panel Removal/Installation
2. Raise the glass fully.
3. Disconnect the power door lock actuator connector (A), and detach the harness clip (B). Remove the rear plug cap (C), then remove the plastic
cover (D) as needed.
NOTE: If the plastic cover is damaged or torn, replace it with a new one.
4. Driver's door: Pull both side flanges (A) of the retainer (B) outward, and pull out the middle flange area (C) of the outer casing cover (D), then
disconnect the lock cylinder cable (E) from the latch.
