TL AWD V6-3.7L (2010)
Underbody Cover: Service and Repair
Rear Undercover Replacement
Rear Undercover Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the rear bumper or the body.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove the rear undercover (A).
1. Remove the bolts (B) and detach the clips (C) that secure the undercover to the body.
2. From under the rear bumper (D), detach the clips (E) securing the undercover and the bumper.
3. Lower the front area of the undercover, and pull the undercover away from the bumper.
2. Install the undercover in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
