TL AWD V6-3.7L (2010)
Rear Fender Liner: Service and Repair
Rear Inner Fender Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body or the related parts.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Remove the rear inner fender (A).
1. Remove the screw (B) that secures the inner fender and the side sill panel (C) from the front of the rear wheel arch.
2. Remove the screws (D) that secure the inner fender and the rear bumper (E) from the rear of the rear wheel arch.
3. Remove the bolts (F)and the screw (G), and detach the clips (H, I, J, K) from the rear wheel arch.
4. Pull out the rear inner fender.
2. Install the inner fender in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.
