TL AWD V6-3.7L (2010)
Arm Rest: Service and Repair
Rear Seat Armrest Beverage Holder Replacement
Rear Seat Armrest Beverage Holder Replacement
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program
NOTE:
-
Take care not to tear or damage the seat covers.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Detach the clips, and release the hooks (A) from the armrest trim (B), then remove the beverage holder (C).
2. If necessary, remove the screw, then remove the armrest trim (A) from the rear seat armrest (B).