TL AWD V6-3.7L (2010)
10. Install the drain channel slider and cable assembly in the reverse order of removal, and note these items:
-
Damaged parts should be replaced.
-
Apply multipurpose grease to the glass brackets (A) and the guide rail area of the frame (B) indicated by the arrows.
-
Before reinstalling the motor, make sure both link lifters are parallel, and in the tilt-up position.
-
Before reinstalling the motor, install the frame and the glass, then check the opening drag See: Testing and Inspection/Component Tests and
General Diagnostics/Moonroof Closing Force and Opening Drag Check.
-
After reinstalling the motor, reset the moonroof control unit See: Sunroof / Moonroof Module/Service and Repair.