TL AWD V6-3.7L (2010)
9. Slide the cable assembly (A) and both glass brackets (B) back, from both brackets, then remove them from the frame (C).
10. Install the drain channel slider and cable assembly in the reverse order of removal, and note these items:
-
Damaged parts should be replaced.
-
Apply multipurpose grease to the glass brackets (A) and the guide rail area of the frame (B) indicated by the arrows.
-
Before reinstalling the motor, make sure both link lifters are parallel, and in the tilt-up position.
-
Before reinstalling the motor, install the frame and the glass, then check the opening drag See: Testing and Inspection/Component Tests and
General Diagnostics/Moonroof Closing Force and Opening Drag Check.
-
After reinstalling the motor, reset the moonroof control unit See: Sunroof / Moonroof Module/Service and Repair.
