TL AWD V6-3.7L (2010)
Power Seat Motor: Testing and Inspection
Driver's Power Seat Motor Test
Driver's Power Seat Motor Test
1. Remove the driver's seat See: Service and Repair/Front Seat Removal/Installation.
2. Disconnect the connector from each power seat motor.
NOTE:
-
For the recline motor, remove the seat-back cover See: Seat Cover/Service and Repair/Front Seat-Back Cover Replacement.
-
All connectors are terminal side of male terminals.
3. Test each motor by connecting power and ground according to the table. When the motor stops running, disconnect battery power immediately.