TL AWD V6-3.7L (2010)
Seat Heater: Testing and Inspection
Seat Heater Test
Driver's Seat
1. Remove the driver's seat See: Service and Repair/Front Seat Removal/Installation.
2. Remove the seat-back cover See: Seat Cover/Service and Repair/Front Seat-Back Cover Replacement.
3. Disconnect the connector A (3P) and connector B (2P) from the seat heaters.
4. Check for continuity between seat heater connector A (3P) terminal No. 3, and seat heater connector B (2P) terminal No. 1. There should be
continuity.
5. If the continuity is not as specified, replace the seat wire harness.
6. Check for continuity between seat heater connector B (2P) terminals No. 1 and No. 2. There should be continuity.
