TL AWD V6-3.7L (2010)
Power Mirror Switch: Service and Repair
Power Mirror Switch Test/Replacement
1. Remove the driver's door panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Panel
Removal/Installation.
2. Remove the screws from the driver's door grip (A) and grip cover (B).
3. Pull out the grip cover slightly from the door grip, then disconnect the 13P connector (C) from the power mirror switch (D).
4. Remove the two screws and the power mirror switch (A) from the grip trim (B).
5. Check for continuity between the terminals in each switch position according to the table.
