TL AWD V6-3.7L (2010)
5. If the clips are damaged or stress-whitened, replace them with new ones.
6. Remove the grommets (B) from the trunk lid, then insert the grommets into the clips on the trunk lid spoiler.
7. If you are reusing the original trunk lid spoiler, carefully remove the remaining double-sided adhesive tape from the trunk lid spoiler. Also
carefully remove the remaining double-sided adhesive tape from the trunk lid. Clean the spoiler and the trunk lid surfaces with a shop towel
dampened in isopropyl alcohol.
8. Attach new double-sided adhesive tape to the edge of the trunk lid spoiler (F) as shown.
