TL AWD V6-3.7L (2010)
7. Remove the TORX bolts (A), then remove the VSA modulator-control unit (B) from the bracket (C).
Installation
1. Install the VSA modulator-control unit (A) onto the bracket (B), then tighten the TORX bolts (C).
7. Remove the TORX bolts (A), then remove the VSA modulator-control unit (B) from the bracket (C).
Installation
1. Install the VSA modulator-control unit (A) onto the bracket (B), then tighten the TORX bolts (C).