TL AWD V6-3.7L (2010)
Brake Pedal Assy: Service and Repair
Brake Pedal Replacement
NOTE: The illustration shows A/T.
1. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
2. Disconnect the brake pedal position switch connector (A).
3. A/T: Remove the wire harness clip (B).
4. Remove the lock pin (C) and the clevis pin (D).
5. Remove the brake pedal support member (E).
6. Remove the brake pedal bracket mounting bolt (F) and the nuts (G).
7. Remove the brake pedal with bracket (H).
8. Remove the brake pedal position switch (I) by turning it 45° counterclockwise.
9. Install the brake pedal in the reverse order of removal.
10. Adjust the brake pedal and the brake pedal position switch See: Adjustments.