TL AWD V6-3.7L (2010)
4. Pull the parking brake lever 1 click.
5. Tighten the parking brake adjusting nut (C) until the parking brakes drag slightly when the rear wheels are turned.
6. Release the parking brake lever fully, and check that the parking brakes do not drag when the rear wheels are turned. Readjust if necessary.
7. Make sure the parking brake lever is within the specified number of clicks (6 to 8 clicks).
8. Install the lid, then install the console box mat.
Major Adjustment (to be done when replacing parking brake shoes)
1. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
2. Release the parking brake lever fully.
3. Remove the console box mat (A), then remove the lid (B).
NOTE: It is easier to use packing tape to remove the console box mat.
