TL AWD V6-3.7L (2010)
Parking Brake Cable: Service and Repair
Parking Brake Cable Replacement
Exploded View
NOTE:
-
The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature cable failure.
-
Refer to the Exploded View as needed during this procedure.
1. Release the parking brake lever fully.
2. Remove the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Removal/Installation.
3. Remove the wire guide base (A), then disconnect the parking brake cables (B) from the equalizer (C).