TL AWD V6-3.7L (2010)
Engine - Coolant Temperature Sensor/Switch: Service and Repair
ECT Sensor 2 Replacement
ECT Sensor 2 Replacement
1. Remove the splash shield.
2. Drain the engine coolant See: Coolant/Service and Repair.
3. Disconnect the ECT sensor 2 2P connector (A).
4. Remove ECT sensor 2 (B).
5. Install the parts in the reverse order of removal with a new O-ring (C), then refill the radiator with engine coolant See: Coolant/Service and Repair
.