TL AWD V6-3.7L (2010)
Radiator: Service and Repair
Radiator Replacement
Radiator Replacement
1. Remove the engine compartment covers See: Engine/Access Cover/Service and Repair.
2. Drain the engine coolant See: Coolant/Service and Repair.
3. Remove the air intake duct splash separator See: Engine/Service and Repair/Engine Removal.
4. Raise the vehicle on the lift.
5. Remove the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
6. Disconnect the A/C condenser fan motor connector (A), and remove the harness clamp (B).
7. Disconnect the radiator fan motor connector (A) and the engine coolant temperature (ECT) sensor 2 connector (B), then remove the harness
clamps (C).
8. Disconnect the lower radiator hose (A).
