TL AWD V6-3.7L (2010)
Radiator Cooling Fan Motor: Testing and Inspection
Radiator and A/C Condenser Fan Motor Test
1. Remove the engine compartment covers See: Engine/Access Cover/Service and Repair.
2. Disconnect the 2P connectors from the radiator fan motor (A) and the A/C condenser fan motor (B).
3. Test each motor by connecting battery power to terminal No. 2 and ground to terminal No. 1.
4. If either motor fails to run or does not run smoothly, replace it See: Radiator/Service and Repair/Radiator and A/C Condenser Fan, Motor, and
Shroud Removal and Installation.
5. Install the engine compartment covers See: Engine/Access Cover/Service and Repair.
