TL AWD V6-3.7L (2010)
2. Install the crankshaft pulley, and tighten the bolt. Do not use an impact wrench.
1. Hold the pulley with the handle (A) and the holder attachment (B). Torque the bolt to
64 Nm (6.5 kg-m, 47 lb-ft) with a torque wrench and a 19 mm socket (C).
2. Mark the bolt head (D) and the crankshaft pulley (E) as shown, then tighten the bolt an additional 60 ° (The mark on the bolt head lines up
with the mark on the crankshaft pulley).
3. Install the drive belt See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair.
4. Install the splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
5. Install the right front wheel.