TL AWD V6-3.7L (2010)
17. Calculate the difference in diameter between point A and point B.
Difference in Diameter
18. If the difference in diameter is out of tolerance, replace the connecting rod bolt.
19. Install the bearing (A), then line up the mark (B) on the connecting rod (C) and the rod cap (D).
20. Apply new engine oil to the bolt threads and flanges. Torque the bolts (E) to 20 Nm (2.0 kg-m, 14 lb-ft).
21. Mark the connecting rod (A) and the bolt head (B) as shown.
