TL AWD V6-3.7L (2010)
6. Check that the air pressure on the shop air compressor gauge indicates over 981 kPa (10.0 kgf/cm2, 142 psi).
7. Inspect the valve clearance See: Valve Clearance/Adjustments.
8. Remove the sealing bolts, then install the VTEC air stop tool B (A) and the VCM air adapter (B) to the inspection hole, then connect the air
pressure regulator (C) as shown.
9. Remove the sealing bolts, then install the VTEC air stop tool A (A) and the VCM air adapter (B) to the inspection hole, then connect the air
pressure regulator (C) as shown.