Service and Repair for Seat Belt Arming and Disarming
Side Curtain Airbag
5. Remove the C-pillar trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim Removal/Installation -
Pillar Areas, then disconnect both SRS floor wire harness 2P connectors (A) from the side curtain airbag 2P connectors.
Seat Belt Tensioner
6. Remove the B-pillar lower trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim Removal/Installation
- Pillar Areas, then disconnect both SRS floor wire harness 4P connectors (A) from the seat belt tensioner 4P connectors.