TL AWD V6-3.7L (2010)
3. Tighten the valve stem nut to the specified torque while holding the tire pressure sensor.
NOTE:
-
Do not use air or electric impact tools to tighten a valve stem nut.
-
Do not twist the tire pressure sensor to adjust its position with the wheel, as this will damage or deform the valve stem grommet.
4. Lube the tire bead sparingly, with a paste-type tire mounting lubricant, and position the wheel so that the tire machine (A) is next to the valve stem
(B) and will move away from it when the machine starts. Then install the tire onto the wheel.
5. With a dry air source, inflate the tire to 300 kPa (3.1 kgf/cm2, 44 psi) to seat the tire bead to the rim, then adjust the tire pressure See:
Maintenance/Alignment/Service and Repair, then install the valve stem cap.