TL AWD V6-3.7L (2010)
9. Pour Acura Long Life Antifreeze/Coolant Type 2 into the radiator up to the base of the filler neck.
NOTE:
-
Always use Acura Long Life Antifreeze/Coolant Type 2. Using a non-Acura coolant can result in corrosion, causing the cooling system to
malfunction or fail.
-
Acura Long Life Antifreeze/Coolant Type 2 is a mixture of 50 % antifreeze and 50 % water. Do not add water.
10. Loosely install the radiator cap.
11. Set the heater temperature control to maximum heat.
12. Start the engine, and let it run until it warms up (the radiator fan comes on at least twice).
13. Turn off the engine. Check the level in the radiator, and add Acura Long Life Antifreeze/Coolant Type 2, if needed.
14. Put the radiator cap on securely, then run the engine again, and check for leaks.