TL AWD V6-3.7L (2010)
Fluid - A/T: Service and Repair
ATF Level Check
ATF Level Check
NOTE:
-
Keep all foreign particles out of the transmission.
-
Check the fluid level within 60-90 seconds after turning the engine off.
-
Higher fluid level may be indicated if the radiator fan comes on twice or more.
1. Park the vehicle on the level ground.
2. Warm up the engine to normal operating temperature (the radiator fan comes on), and turn the engine off. Do not allow the engine to warm up
longer than the time it takes for the radiator fan to come on twice.
3. Remove the dipstick (yellow loop) (A) from the dipstick guide tube, and wipe it with a clean cloth.
4. Insert the dipstick into the guide tube.
5. Remove the dipstick, and check the ATF level. It should be between the upper mark (A) and the lower mark (B).
6. If the ATF level is below the lower mark, check for fluid leaks at the transmission, and the ATF hoses and the line joints. If a problem is found, fix
it before filling the transmission with ATF.
NOTE: If the vehicle is driven when the ATF level is below the lower mark, one or more of these symptoms may occur:
