TL AWD V6-3.7L (2010)
Fluid - M/T: Service and Repair
MTF Inspection and Replacement
NOTE: Use fender covers to avoid damaging painted surfaces.
1. Raise the vehicle on a lift, and make sure it is securely supported.
2. Remove the front splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
3. Remove the fluid check bolt (A) and the sealing washer (B). Check the condition of the MTF and make sure it is at the proper level (C).
4. If the fluid is dirty, remove the drain plug (D) and the sealing washer (E), and drain the MTF.
5. Install the drain plug with a new sealing washer.
6. Lower the vehicle on the lift.
7. Remove the filler plug (A) and the sealing washer (B).
