TL AWD V6-3.7L (2010)
Fluid - Transfer Case: Service and Repair
Transfer Assembly Fluid Replacement (A/T)
Transfer Assembly Fluid Replacement
1. Warm up the engine to normal operating temperature (the radiator fan comes on), then turn the engine off.
2. Raise the vehicle on a lift, and make sure it is securely supported.
3. Remove the drain plug (A), and drain the transfer fluid (hypoid gear oil).
4. Reinstall the drain plug with a new sealing washer (B).
5. Remove the filler plug (A) and sealing washer (B).