TL AWD V6-3.7L (2010)
Maintenance Required Lamp/Indicator: Service and Repair
Resetting the Engine Oil Life Display
Your dealer will reset the display after completing the required maintenance service. You will see "OIL LIFE 100%" on the display the next time you
turn the ignition switch to the ON (II) position.
Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. ON Mode is the equivalent of ON (II).
After maintenance service is done, reset the maintenance minder as follows:
1. Turn the ignition switch to the ON (II) position.
2. If the engine oil life is not displayed press the SEL/RESET button on the steering wheel repeatedly.
3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on
the multi-information display.
4. Select "RESET" by pressing the INFO (up and down arrow icons) button, then press the SEL/RESET button to reset the engine oil life display.
The maintenance item code(s) will disappear, and the engine oil life will reset to "100". If you want to cancel the oil life reset mode, select
"CANCEL".
Important Maintenance Precautions
If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the proper
maintenance interval. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is
needed.
For more comprehensive information on reading, interpreting and resetting the MAINTENANCE SERVICE MINDERS viewed on the instrument
display, See: Service Intervals
