TL AWD V6-3.7L (2010)
^
Dashboard Center Trim Removal/Installation
^
Dashboard Center Vent Removal/Installation
^
Audio Unit or Audio-Navigation unit Removal/Installation
^
Center Console Panel Removal/Installation
^
Passenger's Dashboard Undercover Removal/Installation
^
Center Console Disassembly/Reassembly
^
Center Console Removal/Installation
1. Move the front seats all the way forward, then remove the center console rear trim.
2. Remove the rear bolts securing the center console, then move the front seats all the way back.
3. Do the battery terminal disconnect procedure.
4. Remove the dashboard center trim. Start at the rear part of each trim, and work forward to the dashboard.
5. Remove the dashboard center vent.
6. Remove the audio unit or the audio-navigation unit.
7. Remove the center console panel. The center console panel also includes these parts and connectors:
^
Shift lever boot base (A/T)
^
A/T shift panel
^
Shift knob (M/T)
^
Seat heater switch connectors
^
A/T gear shift position indicator light connector
^
Accessory power socket connector
8. Remove the passenger's dashboard undercover.
9. Remove the console carpet trim (refer to the center console disassembly procedure).
NOTE:
You need to remove the console carpet trim to detach the clips and release the hooks to the center console.
10. Remove the dashboard center trim.
11. Do the center console removal procedure, but do not remove the center console from the vehicle.
Slide it towards the back of the vehicle so you can get to body ground G403. The center console also includes these parts and connectors:
^
Center console RF unit
^
Center console sub harness connector
^
Parking brake lever mounting bolts (loosen only)
^
Parking brake switch connector
^
USB adapter unit connector
