TL AWD V6-3.7L (2010)
26. Check for continuity between body ground and these connector terminals:
Is there continuity between the body ground and each of the terminals in the chart?
YES -
Replace the part that does not communicate with the HDS.
NO -
Repair open in the wire between the DLC (K-Line or Diag-H) and the appropriate connector.
27. Check for B-CAN system DTCs without the HDS See: Information Bus/Testing and Inspection/Component Tests and General
Diagnostics/Troubleshooting - B-CAN System Diagnosis Test Mode 1 and Test Mode 2 (Without the HDS).
Is DTC U0029 and/or U0100 indicated?
YES -
Go to step 38.
NO -
Go to step 28.