TL AWD V6-3.7L (2010)
32. Connect the HDS to the DLC See: Testing and Inspection/Initial Inspection and Diagnostic Overview.
33. Jump the SCS line with the HDS.
34. Disconnect ECM/PCM connector A (49P).
35. Disconnect the HDS from the DLC.
36. Check for continuity between ECM/PCM connector terminal A48 and DLC terminal No. 6.
Is there continuity?
YES -
Go to step 37.
NO -
Repair open in the wire between the ECM/PCM (A48) and DLC terminal No. 6.
37. Check for continuity between ECM/PCM connector terminal A49 and DLC terminal No. 14.
