TL AWD V6-3.7L (2010)
NOTE:
-
Doing this step copies (READS) the ATF life data from the original PCM so you can later download (WRITES) it into the new PCM.
-
If READ DATA indicates FAILED, continue with this procedure.
10. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
11. Jump the SCS line with the HDS.
12. Canada model: If equipped, remove the ECM/PCM connector guard (A).
13. Disconnect ECM/PCM connectors A, B, and C, then remove the ECM/PCM assembly (D).
NOTE: ECM/PCM connectors A, B, and C have symbols (A=Square, B=Triangle, C=Circle) embossed on them for identification.
14. Remove the cover (A) and the bracket (B) from the ECM/PCM (C).
