TL AWD V6-3.7L (2010)
Fuel Tank Pressure Sensor: Service and Repair
FTP Sensor Replacement
With SH-AWD
1. Remove the trunk front trim panel See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service
and Repair/Interior Trim Removal/Installation - Trunk Area.
2. Remove the access panel (A) from the floor.
3. Disconnect the hose (A) and the FTP sensor 3P connector (B).
4. Remove the FTP sensor (C).
5. Install the parts in the reverse order of removal with a new O-ring (D) and a new retainer (E).
