TL AWD V6-3.7L (2010)
Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and Repair.
5. Remove the intermediate shaft See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Removal and Replacement/Intermediate Shaft Removal.
6. Remove the rear WU-TWC bracket, then carefully remove the rear WU-TWC.
7. Carefully install the rear WU-TWC with a new gasket and new self-locking nuts. Tighten the nuts in a crisscross pattern in two or three steps.
8. Install the parts in the reverse order of removal.