TL AWD V6-3.7L (2010)
7. Remove the EVAP canister vent shut valve (A) and the FTP sensor (B) from the EVAP canister (C).
8. Reassemble the EVAP canister with new O-rings (D) and a new retainer (E), then install the EVAP canister bracket.
NOTE: Do not coat the O-rings with oil.
9. Install the parts in the reverse order of removal.
NOTE: The new fuel vapor hose has a ring pull (A) at the connector (B). When you connect the connector and confirm that the connection is secure,
remove the ring pull by pulling it down.
