TL AWD V6-3.7L (2010)
Leak Detection Solenoid: Service and Repair
EVAP Canister Vent Shut Valve Replacement
With SH-AWD
1. Remove the trunk front trim panel See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim Panel/Service
and Repair/Interior Trim Removal/Installation - Trunk Area.
2. Remove the access panel (A) from the floor.
3. Disconnect the EVAP canister vent shut valve 2P connector (A).
4. Remove the cap (B).
5. Remove the EVAP canister vent shut valve (C).
6. Install the parts in the reverse order of removal with new O-rings (D) and a new cap.