TL AWD V6-3.7L (2010)
15. Push the locknut against the transmission housing to seat the transmission range switch into the selector control shaft, and tighten the locknut (A)
to 12 Nm (1.2 kg-m, 8.7 lb-ft) while holding the selector control shaft (B) with a 6.0 mm wrench (C), then bend the lock tabs (D) of the lock
washer against the locknut.
16. Tighten the bolts (E) securing the transmission range switch to 12 Nm (1.2 kg-m, 8.7 lb-ft).
17. Install the control lever (A), the spring washer (B), a new lock washer (C), and the locknut (D) on the selector control shaft (E). Bend the lock tab
of the lock washer against the locknut.
