TL AWD V6-3.7L (2010)
Pressure Regulating Solenoid: Service and Repair
A/T Clutch Pressure Control Solenoid Valve C Replacement
A/T Clutch Pressure Control Solenoid Valve C Replacement
1. Do the battery removal procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
2. Remove the air cleaner housing See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair.
3. Disconnect the A/T clutch pressure control solenoid valve C connector (A).
4. Remove A/T clutch pressure control solenoid valve C, the ATF joint pipes (B), the O-rings (D), the ATF pipe (E), and the gasket (F).
5. Clean the mounting surfaces and the fluid passages of the transmission housing.
6. Install the 8 x 53 mm ATF joint pipe (A) with the filter end into its mounting hole (B).