Replacing A/T Clutch Pressure Control Solenoid Valve A and B: Service and Repair
9. Install new O-rings (E) over the ATF joint pipes.
10. Install A/T clutch pressure control solenoid valve C.
11. Check the connector for rust, dirt, or oil, and clean or repair if necessary, then connect the connector securely.
12. Install the air cleaner housing See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair.
13. Do the battery installation procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
