TL AWD V6-3.7L (2010)
16. Connect the upper transmission mount bracket (A) and the upper transmission mount (B) with new bolts.
NOTE: If the bolt (C) was loosened by mistake during removal, the upper transmission mount must be replaced as an assembly.
17. Remove the floor jack that support the engine/transmission.
18. Install the front splash shield See: Body and Frame/Splash Guard/Service and Repair/Front Splash Shield Replacement.
19. Install the air cleaner assembly See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair.
20. Do the battery installation procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.