TL AWD V6-3.7L (2010)
Fluid Pressure Sensor/Switch: Service and Repair
4th Clutch Transmission Fluid Pressure Switch Replacement
4th Clutch Transmission Fluid Pressure Switch Replacement
1. Do the battery removal procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
2. Remove the air cleaner housing See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair.
3. Disconnect the 4th clutch transmission fluid pressure switch connector, and remove the 4th clutch transmission fluid pressure switch (A).
4. Install a new 4th clutch transmission fluid pressure switch and a new sealing washer (B), and tighten the switch.
5. Check the connectors for rust, dirt, or oil, and clean or repair if necessary, then connect the connectors securely.
6. Install the air cleaner housing See: Fuel Delivery and Air Induction/Air Cleaner Housing/Service and Repair.
7. Do the battery installation procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.