TL AWD V6-3.7L (2010)
4. Connect the dashboard wire harness 4P connector (A) to the front passenger's airbag 4P connector, then reinstall the glove box See: Body and
Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation.
5. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
6. Clear any DTCs with the HDS See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
7. After installing the front passenger's airbag, confirm proper system operation: Turn the ignition switch to ON (II), or press the engine start/stop
button to select the ON mode; the SRS indicator should come on for about 6 seconds and then go off.
