TL AWD V6-3.7L (2010)
3. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
4. Clear any DTCs with the HDS See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
5. After installing the side curtain airbag, confirm proper system operation: Turn the ignition switch to ON (II), or press the engine start/stop button
to select the ON mode; the SRS indicator should come on for about 6 seconds and then go off.
6. Install all removed parts in reverse order of removal. If any clips are stress-whitened, replace them with new ones.
7. Confirm proper headliner/pillar trim overlap See: Service and Repair.
