TL AWD V6-3.7L (2010)
8. Release the lock tab (A) under the cable reel connector with a 90 ° hook shaped tool (B). Slide the tool below the cable reel connector just above
the lock tab. Release the lower lock tab (C), and slide the cable reel off the column.
Installation
1. Before installing the steering wheel, make sure the front wheels are aligned straight ahead.
2. If not already done, disconnect the negative cable from the battery, then wait at least 3 minutes.
3. Set the turn signal canceling sleeve (A) so that the projections (B) are aligned vertically.
4. Carefully install the cable reel (A) on the steering column shaft. Then connect the dashboard wire harness 20P connector (B) to the cable reel, and
connect the cable reel 4P connector (C) to the dashboard wire harness 4P connector (D).