TL AWD V6-3.7L (2010)
4. Remove the clamps, the bolt, and the wheel speed sensor (C).
5. Install the wheel speed sensor in the reverse order of removal, and note these items:
-
Do not twist the sensor wires.
-
If the wheel speed sensor comes in contact with the hub bearing unit, it is faulty.
-
Make sure there is no debris in the sensor mounting hole.
-
Lubricate the O-ring on the wheel speed sensor.
6. Start the engine, and make sure the ABS and the VSA indicators go off.
7. Test-drive the vehicle, and make sure the ABS and the VSA indicators do not come on.
